Acorn Stairlifts Installation Tips

Service-Man-Inspecting460x300

Stairlifts are fairly self-explanatory; they are used for lifting people and wheelchairs up and down stairs. The stairlift is a very important device these days, giving back mobility to many. Acorn stairway lifts ensure safety and quality. However, the stair lift, also known as the stair chair, can also be a very dangerous device if improperly used or installed. Here are some Acorn Stairlifts Installation Tips to ensure these Acorn stair lifts (known by many names) are not a hazard to loved ones in need.

First, users should be aware of the risks of installing an acorn stair lift. Loose clothing or body parts can become trapped in the gears. Improper use of tools (e.g. drilling), electrical contact, falling down stairs, and falling tools are all hazards to be considered when installing a stair elevator. The acorn stair lifts manual provides guidelines to prevent injuries. Always wear safety goggles, do not use worn-out tools (due to the risk of a handle flying, off, etc), and be aware of tripping hazards around the stairs.

The acorn stairlift hinged rail has a fifteen inch long lower track section. It is easy to install, however, the rail must be fixed to the staircase in order for it to fully close in the lowered position. When installing a stock rail, it may need to be cut down first. Measure from the landing to the floor in a straight line, the rail length can be calculated by adding eight inches to the measurement. The rail must be measured on the underside, and all cuts must be made at the top. When installing acorn stair lifts upper charger points, it must first be determined where the stair chair lift will rest, which is when the footrest is aligned with the top step. Position the charge point on the side of the rail, putting it in contact with the spring-loaded charging pins on the inside of the stairway elevator carriage.

Mark where the upper ramp will be fixated, so that it contacts and activates the micro-switch under the acorn chair lift, the acorn stair features a sit/stand frame that allows the user to either sit or stand on the footrest, holding onto a security bar as they ascend or descend the wheelchair stair lift. These are not difficult to install and should require no further instruction than what is given in the owner’s manual. When installing chair lifts, it is common that a door may be at the top of the stairway. In this instance, stair lift chairs can still clear the doorway by elevating the rail. Doubling the clamps of the upper bracket will effectively solve this. This shortens the rail, leaving the doorway open.

Although acorn lifts are designed for simple installation, the above risks should be kept in mind and the carriages of the platform lifts are rather heavy. If there is any question of ability to properly handle tools, or handling weight, customers should have the procedure executed by a qualified individual, usually a dealer. When browsing stair lift prices, keep in mind that there are varying models fitted to suit varying needs. For example, curved stairlifts were made for those whose stairs are not straight. However, stairlifts prices of this variety are considerably more expensive, so one might consider browsing used stairlifts for a better deal on a curved stair lift. There are disabled lifts, which are often referred to as wheelchair stair lifts, for the especially limited.

Stairway chair lifts provide convenience and safety for those who cannot move on their own. Acorn provides a fine selection of this product manufactured for easy placement and usage. They offer excellent support and can change the lives of those challenged by immobility everywhere.

Related:

  1. Acorn Stairlifts Installation Guide
  2. Stairlifts Shopping Tips and Reviews
  3. Acorn Stairlifts: Insiders Guide to Installation and Service
  4. How to Measure for Your New Stairift Installation
  5. Top 17 Stair Lift Tips